Wireshark training built around broadcast traffic

Most Wireshark courses are written for IT staff and use web and email traffic as examples. Mine use the protocols broadcast engineers meet: PTP, RTP audio, multicast and the control traffic of AoIP systems.

I run two courses: a one-day introduction for any broadcast engineer, and a longer course for system specialists, taught on your own network. I have delivered versions of this training dozens of times for the BBC Academy.

Network Troubleshooting with Wireshark

One day, for up to six delegates, each at their own workstation. No Wireshark experience needed.

Morning: the network underneath

  • Your first capture: finding your own traffic among a network’s background chatter
  • Ping, and recognising a firewall from what the capture shows
  • Teaching Wireshark the names of your devices with a hosts file
  • ARP, DNS and DHCP, healthy and broken, including spotting a rogue DHCP server
  • TCP: proving whether a device is reachable from the handshake

Afternoon: audio on the network

  • Finding audio streams from their SAP announcements and reading the SDP
  • RTP: reading the header, then counting and locating packet loss
  • IGMP: what a flooded network looks like, and watching joins and leaves
  • AES67: streams nobody announces, PTP, and DSCP priorities
  • Dante: recognising it when Wireshark cannot decode it
  • Long captures: capture filters and ring buffers
  • A final exercise diagnosing a real Dante fault from a capture taken in a working BBC studio

Delegates leave able to take a capture from a broadcast network, find the conversation that matters, and say what is wrong with it.

Wireshark for AoIP Analysis

Two days or longer, depending on your network, for up to six delegates. For system specialists who already use Wireshark.

This course is built around your own AoIP network and your own captures. I most recently ran it over two days for BBC engineers at Broadcasting House in London.

  • Recap of the AoIP protocols: RTP, UDP and multicast
  • Overview of your network’s high-level design
  • Obtaining captures from your network: from hosts, switches and taps
  • Tailoring Wireshark to your network and devices
  • Analysing AoIP faults: PTP, packet loss, latency and offset, and jitter
  • Typical values from hardware, software and virtualised devices
  • Inaccuracies in Wireshark timestamps, and what they mean for your measurements
  • Beyond Wireshark: writing Python and Lua scripts to analyse AoIP faults

I share my own Lua dissectors for AoIP stream and control protocols, and my Python analysis scripts, with delegates after the course.

Ask about a course