Independent validation of AoIP installations

I test an audio network against its design before it carries programme audio, and report what I find. The work is independent of the supplier and the integrator, so the result is evidence you can rely on at handover.

What I check

  • Timing. PTP grandmaster election, boundary clock behaviour, offset and delay under load, and failover to the backup clock. Also NTP: that it is present, so diagnostic tools can sanity-check PTP, and that it is synchronised to PTP within about a millisecond. This is often overlooked
  • Streams. Packet loss, offset and jitter, measured for each type of device
  • Network. Multicast behaviour including IGMP and PIM, QoS marking and queueing
  • Resilience. What happens to audio and timing when a link, a switch or a clock is lost
  • Interoperability. Whether devices from different manufacturers exchange audio as claimed

What you receive

A written report with the measurements, the captures behind them, each failure explained, and a recommended fix for each. I also generate SDP files and Wireshark hosts files for the installation, so your own engineers can diagnose it afterwards.

Measurements you can sign off on. A project is often waiting for one thing: accurate figures for the packet loss, latency and jitter of its AoIP streams. I measure them with hardware timestamps, so acceptance rests on numbers and not on someone listening for clicks.

When it is useful

  • Before accepting a new installation from a supplier
  • After a change to switches, firmware or clocking
  • When two systems that each work alone have to work together

Discuss a validation