DHD mixing systems: configuration, training and faultfinding
I configure DHD mixing systems, teach engineers and operators to use and maintain them, and diagnose them when they misbehave.
Configuration
I build DHD configurations to suit the way a studio works: sources, buses, logic, routing, and the layout of the control surface and its screens.
Since 2007 I have configured many of the BBC’s radio studio DHD systems, each from scratch and usually working alone:
- Eleven RM4200D systems, from 2007
- Seven 52/MX systems: configuration work for BBC Cardiff in 2019, then the configurations for Radio 4’s Across the UK studios in Birmingham and Salford in 2022, including a complete redesign of most of the TFT screen layouts
- Six 52/RX2 systems, in 2023 and 2024, as used in the newest Radio 1, Radio 2 and Radio 3 studios, including a complete redesign of every TFT screen layout. That project took about six months: mostly DHD configuration, with some AoIP testing, and training on both
Training
A three-day course for up to six delegates, for the engineers who support DHD systems and the people who operate them. It is taught on your own DHD hardware, using your own configurations.
I have delivered the general RM4200D course dozens of times since 2007. I ran my first 52/MX course for BBC London in 2009, then several 52/MX courses for BBC Cardiff in 2019 and for Birmingham and Salford in 2022. In 2023 and 2024 I delivered tailored RX2 courses to the acceptance and support teams in BBC Technical Operations.
The current course covers the 52 series: RX2, DX2 and TX2.
Day 1: introduction
- The hardware: cores, concentrators and console modules
- Operating the desk as an engineer needs to: getting signals through it, auxes, clean feeds and routing
- Solo, GP and Assist modes
- The engineering documentation
- Introduction to Toolbox, the configuration software
Day 2: Toolbox and configurations
- Toolbox in detail
- Adding, changing and interconnecting hardware
- Building a configuration from scratch: hardware, channels, standard audio features, Output Functions and Super Output Functions for special features, simple logic, simple TFT views, meters and level detection
Day 3: complex configurations and engineering support
- Complex logic: Logic Functions and virtual keys
- Complex TFT views built from view containers
- A study of the configurations in your own studios
- Diagnostics: the system report, network settings, firmware, resets and logging
- Group exercises: adding a new source with its clean feed and monitoring, then finding and fixing faults planted in a configuration
The RM4200D course has the same shape. Day 1 covers concepts, hardware and operation. Day 2 is a full day in which each delegate writes a configuration from scratch and tests every stage on a real desk. Day 3 covers logic and processing in depth, maintenance and diagnostics.
A 52/MX version follows the same outline as the RX2 course. In its practical, each delegate works through a 39-page guide and builds a real studio’s configuration in stages: core and concentrator hardware, audio inputs and outputs, the console and its fader channels, bus routing, a monitoring panel, TFT views, and faultfinding in the logic. I would update this course for your systems before running it.
Faultfinding
Recent DHD systems sit on an AoIP network, so a DHD fault is often a network or timing fault. I can investigate both the configuration and the AoIP underneath it.